Installation center
Clear, practical steps for building a clean and durable modular sports surface from the first tile to the final edge ramp.
Good installation begins before the tiles come out of the carton. Use this checklist to prepare the site, work safely and avoid avoidable corrections later.
Wear gloves and protective eyewear throughout the work.
Confirm the layout and tile direction before you start.
The subfloor must be flat, dry and free of debris.
Contact Courtiva support when a site condition is unclear.
REFERENCE GUIDE: Courtiva is not responsible for improper installation, unsuitable subfloor conditions or product misuse. Confirm project-specific requirements before work begins.
Gather these essentials before you start. A prepared work area keeps the installation sequence clean, accurate and fast.
Work through each stage in order. The old guide content is retained here and organized as a clear field-ready workflow.
01
Ensure the installation site is perfectly flat, completely dry and thoroughly cleaned of debris. Use a tape measure to determine the court dimensions and verify the tile count before opening the cartons.
02
Choose a fixed corner, usually the top-left from the main viewing angle, or begin from the center line. Orient each tile so the female loops face the direction you are expanding towards.
03
Align the pegs over the loops and press down. Use your foot or a rubber mallet to tap the connection points until they click. Keep every seam tight and flush as the surface expands.
04
At walls or obstacles, mark the cut line with a marker and tape measure. Use a utility knife or jigsaw to trim the tile carefully for a clean, accurate fit.
05
Snap the male and female edge ramps around the perimeter. They create a smooth transition, reduce trip risk and give the court a finished professional appearance.
06
Walk the full court and check for loose connections or raised edges. Tap down any high points, then rinse the surface with water or sweep it clean. The court is ready to play.
Use the next resource that fits the question, or send Courtiva your site details for product-specific guidance.